Description
An economical lithium-silicate sealer, densifier, and hardener designed for concrete surfaces. It deeply penetrates cured concrete, reacting to form a calcium silicate hydrate that enhances the concrete’s properties. Treated surfaces will be more resistant to abrasion, less porous, and better protected against dusting and water permeability, while maintaining a breathable quality and the concrete’s natural appearance.
Product Features
- Packaged ready-to-use with a simplified application process
- Reduces porosity and dusting, increases abrasion resistance, and does not alter the natural color of the concrete
- Contributes to potential LEED credits, VOC content is 0 g/l, making it an environmentally friendly choice
- Suitable for both new and existing concrete surfaces
- Shelf life is two years when stored in original, tightly closed containers at a cool, dry location
Product Application
- Apply only to clean surfaces free of cures, bond breakers, oil, dirt, and debris. For existing concrete, clean, neutralize, and thoroughly rinse before application
- Can be applied with a low-pressure sprayer, followed by spreading with a soft broom or microfiber applicator to ensure even coverage
- Apply with 500-800 ft²/gal for fresh concrete and 250-700 ft²/gal for existing concrete, depending on the finish
- Typically takes 1 - 2 hours to dry, allowing for quick return to service
- Apply in temperatures from 40°F - 100°F
Coverage
Coverage rates will vary with concrete porosity.
Fresh, Uncured, Burnished Concrete: 500 - 800 ft² per gal
Existing Steel Trowelled Concrete: 400 - 700 ft² per gal
Existing Float Finished Concrete: 250 - 350 ft² per gal
