Description
Eucobar is designed to be used as an evaporation retardant on concrete surfaces of all types. When sprayed over fresh concrete, it forms a monomolecular film that prevents rapid moisture loss from the concrete surface. It is easy to use requiring only the addition of water before spray application. Eucobar is especially effective when concreting operations must be performed in direct sun, wind, high temperatures, or low relative humidity.
Product Features
- Holds in surface moisture on concrete floors, slabs, and repairs
- Helps prevent plastic shrinkage cracking
- Easy and economical to use
- Helps eliminate crusting caused by loss of surface moisture
- Water based for total compatibility with fresh concrete
- Excellent for both interior and exterior concrete projects
- Will not affect adhesion of curing compound or other treatments
Product Applications
- Floors
- Pavements
- Concrete toppings
- Vertical/overhead repairs
- Dry shake floors including all SurFlex and Euco-Plate formulations
- Specialty iron toppings
- Parking decks and ramps
Coverage
Dilution Rate: 9:1 (Water:Eucobar)
Eucobar (after dilution) will cover approximately 200 to 400 ft²/gal (5 to 10 m²/L). Coverage will vary depending on
concrete texture and wind conditions. For estimating purposes, 1 gal (3.8 L) of Eucobar concentrate will treat 2,000 to
4,000 ft² (186 to 372 m²) of concrete surface area, but is highly dependent upon ambient conditions.
